How to use coinwallet-payder's wallet


The wallet function of coinwallet-payder has three functions of deposit, withdraw and Auto Sweep.


How to deposit crypto currency in coinwallet-payder's wallet


 wallet ⇒ Deposit ⇒  Copy Deposit Address ⇒ You can remit money to coinwallet-payder wallet by pasting to the remittance source (outside) wallet and instructing remittance.



 
  ※Please make sure to copy and paste the address to prevent erroneous sending.
  ※If the external wallet has a barcode function, you can read the deposit address of coinwallet-payder by reading the QR code.

【About new deposit address creation】

 coinwallet-payder is equipped with a function to change the deposit address. Initially, the deposit address prepared by coinwallet-payder is displayed. If you want to change, you can change to a new deposit address by "New address ⇒ Click".




  ※You can change the address any number of times.
  ※You can do the following things.Current deposit address ⇒ I received a COIN ⇒  "New address ⇒ click" ⇒New deposit address different from past  ⇒Receive COIN
  ※If you creation a new deposit addresses, the past deposit address will not be displayed. Please note that past deposit address can not be used.


【How to see Deposit History】

 In the Deposit History, time, transaction ID, Amount,Fee,Type,Confirmations,State/Action are displayed.


  
  ※time=It will be displayed in year / month / day / hour/minute.
  ※ transaction ID=You can check the current remittance status of crypto currency (Tracking code)
  ※Amount=COIN quantity
  ※Fee=Fee for coinwallet-payder deposit is free.
  ※Type=Distinction between deposit or commercial deposit
  ※Confirmations=When the confirmation of the crypto currency is completed it will be accepted in the wallet of coinwallet-payder.
  ※State/Action=When there is a remittance instruction from outside, it becomes 『submitted』, and when confirmation of all ends, it changes automatically to 『accepted』.


How to withdraw from coinwallet-payder's wallet


【Please register withdraw address first】

 coin wallet-payder wallet ⇒ Each COIN Withdraw ⇒ Manage Address ⇒Label entry (Anything is acceptable if the destination can be identified) · Address entry (Enter the Address  that you want to Withdraw) ⇒add to

 

  
  ※There is no restriction on the number of registered addresses by address management 
     ※The address registered by address management can be used in the selection formula from the next time.
  ※The address set as the default will be displayed first from next time.


 

【Withdrawal operation】

 After selecting the destination address in address management ⇒ Withdraw amount input ⇒ Please check the fee ⇒ Please check Withdraw Total Amount ⇒ Google authentication system input ⇒ Click submit to complete




 ※The current State is displayed in the withdraw history
    ※The state/action progress is 『Done』 and remittance is completed.


【How to see Withdrawal History】


In the withdrawal History, time, Address, Actual Amount,Fee,Type,State/Action are displayed.


 

        ※time=It will be displayed in year / month / day / hour/minute.
  ※ Address=Withdrawal address
  ※Actual Amount=COIN quantity
  ※Fee=Withdrawal fee (withdrawal fee for each COIN will occur when withdrawing.)  Click here for the withdrawal fee
  ※Type=manual withdrawal
  ※State/Action=Once there is a withdraw order, it will become 『pending』 once and enter the confirmation work of the coinwallet-payder. When confirmation of payder is completed and it dispenses from the wallet, it changes to 『Done』..
              (The coin's network may be delayed and the symptoms of the remittance account may take time.)



How to use auto sweep from wallet of coinwallet-payder


【Please register withdraw address first】

 coin wallet-payder wallet ⇒ Each COIN Withdraw ⇒ Manage Address ⇒Label entry (Anything is acceptable if the destination can be identified) · Address entry (Enter the Address  that you want to Withdraw) ⇒add to

 

 

  ※There is no restriction on the number of registered addresses by address management 
     ※The address registered by address management can be used in the selection formula from the next time.
  ※The address set as the default will be displayed first from next time.


【How to set auto sweep】

 Click 『Enable Auto-Sweep』 and select it ⇒ Select the destination address in 『Manage Address』⇒ Set 『time』⇒ Select 『Cycle』⇒『Minimum Amount to Auto-Sweep』 input ⇒『Fee』 confirmation ⇒『Withdraw Total Amount』 Confirmation ⇒『Google Authenticator』 input ⇒ Click 『Up date』⇒『1, Auto Sweep in enabled』 is displayed and setting is completed with 『2, setting location lock』.




  ※The current status is displayed in the withdrawal history.
  ※The 『State/Action』 progress becomes 『Done』 with remittance completion.
  ※The Auto-Sweep function is executed repeatedly at each specified time and cycle.
  ※『Time』 can be set in 『24 hours』
  ※『Cycle』 can be set on 『1 Day(s)』,『 3 Day(s)』,『 7 Day(s)』


  【For example】
 

 ① Set 『cycle = 1 Day (s)』,『Time = 13: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 1 13:00』⇒『Auto-Sweep』 will be done in 1 Day (s) cycle.
 ② Set 『cycle = 1 Day (s)』,『Time = 11: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 2 11:00』⇒『Auto-Sweep』 will be done in 1 Day (s) cycle.
 ③ Set 『cycle = 3 Day (s)』,『Time = 13: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 3 13:00』⇒『Auto-Sweep』 will be done in 3 Day (s) cycle.
 ④ Set 『cycle = 3 Day (s)』,『Time = 11: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 4 11:00』⇒『Auto-Sweep』 will be done in 3 Day (s) cycle.
 ⑤ Set 『cycle = 7 Day (s)』,『Time = 13: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 7 13:00』⇒『Auto-Sweep』 will be done in 7 Day (s) cycle.
 ⑥ Set 『cycle = 7 Day (s)』,『Time = 11: 00』 on 『January 1 12:00』⇒First Auto-Sweep is executed at 『January 8 11:00』⇒『Auto-Sweep』 will be done in 7 Day (s) cycle.

    

【How to cancel Auto-Sweep】

 Exclude selection by clicking 『Enable Auto-Sweep』 ⇒『Google Authenticator』 input ⇒ Click 『Up date』 ⇒ 『1, Auto Sweep in enabled』 is hidden and 『2, setting location lock』By canceling Auto-Sweep can be canceled.




【How to see Withdrawal History】

 In the withdrawal History, time, Address, Actual Amount,Fee,Type,State/Action are displayed.



 
  

  ※time=It will be displayed in year / month / day / hour/minute.
  ※ Address=Withdrawal address
  ※Actual Amount=COIN quantity
  ※Fee=Withdrawal fee (withdrawal fee for each COIN will occur when withdrawing.)  Click here for the withdrawal fee
  ※Type=Auto Sweep
  ※State/Action=Once there is a withdraw order, it will become 『pending』 once and enter the confirmation work of the coinwallet-payder. When confirmation of payder is completed and it dispenses from the wallet, it changes to 『Done』..
              (The coin's network may be delayed and the symptoms of the remittance account may take time.)